The engineers at Hobbywing have created a new speed controller to replace the current G2 version of their XeRun XR10 Justock series.
The G2 version is well-known since 3 years and was (and still is) the very reliable speed controller of the highly competitive FWD class at the Euro Touring Series.
With the G2 version not being available from Hobbywing anymore form now on, the new G3 will be the ESC of choice for the ETS races in the Hobbywing Frontwheel class. Both ESCs are featuring the same setting parameters, and the used RPM limiter is also exactly the same (17.500 rpm). The main changes between the two ESC`s is about the hardware with a new case, a built-in capacitator, and all black power wires.
“To make it easy for all ETS FWD racers, both versions (G2 and G3) will be allowed at the season final in Daun, and in the whole upcoming Seaosn #16 2023/24.“
What is new on the XeRun XR10 Justock G3 speed controller? Here are the features:
- Aluminum case
- Built-In capacitor
- Reverse polarity protection
- Programming also possible via LCD box and WiFi/OTA module!
- BEC optional with 6.0V or 7.4V – adjustable at 4A
- Black motor and battery cables
Technical Data
- Type: Brushless with sensor
- Continuous current: 60A
- Input voltage: 2S LiPo
- BEC: 6.0/7.4V – 4A
- Motor limit: 10.5T (Attention, load dependent!)
- Dimensions: 40.9×33.9×32.1mm
- Weight: 75.4g
Source: ToniSport/ETS
