MR33, in collaboration with BOOM RC, is launching the brilliant “Horizontal Body Mounting Tool” to make customizing your 1:10 scale touring car body a safe and easy task. Many racers are struggling while marking the holes for the horizontal body posts and the new MR33 tool will bring this struggle to an end now.
The “MR33 Horizontal Body Mounting Tool” consists of high-quality 3D-printed components and is assembled according to a modular system. This means you can use it with the most important 1:10 touring car bodies and always mark and drill your horizontal holes perfectly.
The base part is printed in such a way that it can be placed perfectly on the rear wing brackets of the corresponding body. This means that everything is perfectly centered right from the start. Use the enclosed full-surface plastic washers to set the desired distance between the body holes (measured downwards from the spoiler mount). Most teams already have specifications here that you can use as a guide.
The marking plate screwed to the base part indicates the perfect hole positions that you need to mark by means of the exact hole spacing. Then all you have to do is drill the holes and that’s it. Sounds simple – and it is.
With the “MR33 Horizontal Body Mounting Tool”, shaking or marking the holes at an angle is practically no longer possible. Different versions (with different inserts) are available, and MR33 has also prepared the marking plates for different touring car models.
Features:
- 3D printed from high-quality materials
- Extremely accurate fit for precise marking of the holes
- Cool MR33 look made by BOOM RC
- Easy height adjustment thanks to full-surface washers (included)
- Marking plates available for different vehicle types (hole spacing)
- Inserts for different bodies (e.g. Wolverine, Twister, Speciale) can be purchased separately