Destiny has released a new FWD car kit – right in time for the new Outdoor Season in Europe. The Destiny RX-10F 3.0 features a lot of new parts and functions and the car is already available in Hobby Shops!
Find out about the most importand new Features:
- New graphite rear lower arm to increased rear caster.
- New spring steel front metal bushing double joint drive shaft.
- New Interchangeable front and rear upper aluminum bulkheads. Front caster 4/5 deg, rear caster 5/4 deg adjustable by different orientation of bulkheads.
- New lower bulkheads install with upper bulkheads with centering insert and make more reliable.
- New aluminum adjustment ball bearing hub.
- New motor mount with Multi-Flex Chassis adjustment.
- Low friction drive belt (78T).
- New lightweight alum solid layshaft. Spur gear removal easily.
- New 38T gear differential with spring steel differential cup.
- New 7075 aluminum steering center plate and steering arms with ball bearings.
- 7075 aluminum lightweight low profile floating servo mount.
- Swap the graphite battery holders to change the battery forward/backward position.Quick release battery backstop and height adjustable to compatible difference size battery.Battery placement fully fine adjustable
- Interchangeable 3mmgraphite lower arm for left and right.
- Smooth movement suspension by hard coated 5mm lower arm pivot balls and high quality bushing.
- Graphite lower arm length (track width) adjustable by difference orientation of steering block pivot ball holder, four length was selectable by two different holders.
- Front and rear aluminum lower shock mount.
- Front and rear steering block made by high grade 7075 aluminum and interchangeable.
- Front and rear steering plate swap for two difference steering response setup.
- Large size 6x11x4mm ball bearing used in inner of steering block for more reliable and efficiency.
- Mounted the pivot balls by screws through a groove and a thread on bulkhead. Upper arm free movement adjustable for active caster setting simply.
- Laser engraved marking on bulkhead for easy identify differential position.
- Lower position of front and rear anti-roll bar mounting.
- Shock tower composed by two pieces, easy installation and tweak free alignment.
- Precise shock angle adjustment by shim.
- Shock tower mounted to chassis for more stability and improved the traction.
- 7075 aluminum lightweight hardened wheel hub.
