Destiny has released a new FWD car kit – right in time for the new Outdoor Season in Europe. The Destiny RX-10F 3.0 features a lot of new parts and functions and the car is already available in Hobby Shops!

Find out about the most importand new Features:

• New graphite rear lower arm to increased rear caster.
• New spring steel front metal bushing double joint drive shaft.
• New Interchangeable front and rear upper aluminum bulkheads.  Front caster 4/5 deg, rear caster 5/4 deg adjustable by different orientation of bulkheads.
• New lower bulkheads install with upper bulkheads with centering insert and make more reliable.
• New aluminum adjustment ball bearing hub.
• New motor mount with Multi-Flex Chassis adjustment.
• Low friction drive belt (78T).
• New lightweight alum solid layshaft.  Spur gear removal easily.
• New 38T gear differential with spring steel differential cup.
• New 7075 aluminum steering center plate and steering arms with ball bearings.
• 7075 aluminum lightweight low profile floating servo mount.
• Swap the graphite battery holders to change the battery forward/backward position.Quick release battery backstop and height adjustable to compatible difference size battery.Battery placement fully fine adjustable

• Interchangeable 3mmgraphite lower arm for left and right.
• Smooth movement suspension by hard coated 5mm lower arm pivot balls and high quality bushing.
• Graphite lower arm length (track width) adjustable by difference orientation of steering block pivot ball holder, four length was selectable by two different holders.
• Front and rear aluminum lower shock mount.
• Front and rear steering block made by high grade 7075 aluminum and interchangeable.
• Front and rear steering plate swap for two difference steering response setup.
• Large size 6x11x4mm ball bearing used in inner of steering block for more reliable and efficiency.
• Mounted the pivot balls by screws through a groove and a thread on bulkhead.  Upper arm free movement adjustable for active caster setting simply.
• Laser engraved marking on bulkhead for easy identify differential position.
• Lower position of front and rear anti-roll bar mounting.
• Shock tower composed by two pieces, easy installation and tweak free alignment.
• Precise shock angle adjustment by shim.
• Shock tower mounted to chassis for more stability and improved the traction.
• 7075 aluminum lightweight hardened wheel hub.

New from LRP Electronic are these 30mm and 40mm motor cooling fans. They are coming in a typical LRP WorksTeam look and LRP also offers COnveyor Ducts for the perfect airflow from the fan to the motor.

The products are tested extensively by the LRP team drivers worldwide, and the new direct mount WorksTeam Aluminium High Rev. Motor Fans in 40mm #501837 / 30mm #501830 and matching Conveyor Ducts #501990/501991, are now available! The new high performance aluminium fans are the heart of the LRP fan series.

The priducts are Developed in Europe, by using LRP`s proprietary fan blade design, combined with specially wound motors for extremely high RPM. They offer maximum thrust and a stylish, classy LRP look thanks to their two-colour anodizing. Screws and full black extension wire included. The matching Conveyor Ducts with integrated Venturi duct direct the airflow directly to the motor to further improve cooling.